|
Recently Added
Video Displays
Speakers
Sources
Electronics
Accessories Ultimate Demos Ultimate Gear Scott Wilkinson Thomas Norton Fred Manteghian Kim Wilson How To Features Audio/Video News CES 2009 CEDIA 2008 CES 2008 CEDIA 2007 HE 2007 CES 2007 CEDIA 2006 HE 2006 CES 2006 Thomas J. Norton Michael Fremer Joel Brinkley Scott Wilkinson AV Links Contact Us Flatscreen TVs LCD TVs Plasma TVs HDTV AV Receivers Home Theater in a Box Digital Projectors DLP Projectors Video Projectors Surround Sound Dolby 5.1 |
Aperion Audio Intimus 633-T (II) Surround Speaker System:
Measurements
Measurement Conditions The measurements shown were taken with the Aperions' grilles in place. The nominal impedance and sensitivity are estimates derived from the test graphs. The effective bass limit is, by our convention, is taken as the minus 10dB point in the response (relative to the level at 1kHz, unless stated otherwise). In a real room this falling response will be enhanced by room gain. The gain, and therefore the actual response, however, will vary with the room.
Measurement Summary Their measured responses are respectable at their prices. Their off-axis measurements are also good. In particular, the three-way, 634-VAC center channel speaker is relatively (but not completely) free of the off-axis response suckouts (caused by comb filtering interference patterns between drivers) that are present in nearly all two-way, woofer-tweeter-woofer center channel designs we have measured.
Details: Intimus 633-T (II)
Discussion: Aperion Intimus 633-T (II)
Fig.1: Aperion Intimus 633-T (II) pseudo-anechoic response off the horizontal axis at 45 degrees (red) and 60 degrees (blue). The horizontal off-axis response falls off relatively smoothly at higher frequencies. Note the off-axis suckout at 2kHz in the vertical response, however (Fig.2). It's most serious above the tweeter (red curve). The optimum ear height for listening to the 633-T (II) would appear to be either on or, counter intuitively, just slightly above the tweeter axis (just a few degrees above will reduce the 1.7kHz peak without risking the dip that develops at a higher, 15-degrees above.)
Fig.2: Aperion Intimus 633-T (II) pseudo-anechoic response at 15 degrees above (red) and 15 degrees below (blue) the tweeter.
Details: Aperion Intimus 634-VAC Center
Discussion: Aperion Intimus 634-VAC Center
Fig.3: Aperion Intimus 634-VAC pseudo-anechoic response off the horizontal axis at 45 degrees (red) and 60 degrees (blue). The wide off axis curves, taken at 45 and 60 degrees, aren't as smooth as we have measured from some other three-way center channel speakers, including the smaller Aperion 533-VAC. But the latter measured much leaner through the midbass. The suckout in the 634-VAC's off-axis response at 400Hz-500Hz is likely due to the interaction between the two laterally displaced woofers.
Fig.4: Aperion Intimus 634-VAC pseudo-anechoic response at 15 degrees above (red) and 15 degrees below (blue) tweeter. The vertical response of the 634-VAC center (Fig.4) indicates that the best vertical listening height is on or slightly below the tweeter axis. This is a respectable set of measurements for such relatively inexpensive speakers. I would, however, like to see a smoother response in both the 633-T (II) and 634-VAC through the upper midrange, and the elimination of the off-axis dip at 500Hz in the 634-VAC. All figures: Violet curve: pseudo-anechoic response on tweeter axis, averaged across a 30-degree horizontal window, combined with nearfield woofer and port responses. All measurements taken at 1-meter.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
